Below are the available bulk discount rates for each individual item when you purchase a certain amount
WHAT DOES REFURBISHED MEAN? In most cases these are items that were returned during 30 day satisfaction periods. All items are inspected and tested and any components deemed unworthy for resale or that fail our testing are discarded and replaced with new parts. In general these are near perfect items which may have minor wear or scratches on exterior body of massager.
Pure-Wave CM7 Massager, 6 massage sticks, UL approved charger, Stand.
6 month limited warranty
■ Charging First time charge: Fully charge until indicator light is green. First time may take 1 to 2 hours. Recharging is faster (1 hr. max) For best results charge massager before use. 1. Plug the CHARGER into an electrical outlet. 2. Plug the CHARGER into the Pure-Wave cordless massager. The BATTERY CHARGING LIGHT is red to indicate charging is in process. 3. The BATTERY CHARGING LIGHT displays a green light when charging is complete. When green light appears, remove charger from device.
■ CM7: Percussion massager 1. Remove CHARGER for operation. For safety reasons, product will not turn on when CHARGER is plugged into device. 2. Attach the MASSAGE STICK of your choice. 3. Turn the On/Off & SPEED DIAL on (Clockwise). You will immediately hear ONE BEEP and if fully charged the POWER LIGHT displays a solid green light to indicate product is on and percussion mode is engaged. Note that a green blinking light indicates vibration mode is on. 4. Turn CLOCKWISE immediately to initiate PERCUSSION MODE and set desired speed. 5. For User’s safety, the product is designed to automatically power off and stops itself if too much load is applied on the product. In this case, Pure-Wave cordless massager must be reset. Turn power off if it is still on, plug the CHARGER into an outlet, and then plug the charger into the product. Wait about three seconds and then unplug CHARGER from product, and then turn product on and start massaging.
■ CM7: Vibration Facial Massager 1. Push the facial massage stick tightly onto the stick holder. 2. Turn the power dial (On/Off & SPEED DIAL) on and set it to ‘0’ speed level. You will immediately hear ONE BEEP and the POWER LIGHT will display green. 3. Keep POWER DIAL in ‘0’ speed position for a few seconds until you see the POWER LIGHT flashing. 4. Turn CLOCKWISE to initiate vibration facial massager and set to desired intensity. Note the Percussion Head will not work in this mode. To initiate percussion mode, turn dial off and then back on turning clockwise until percussion mode engages.
Posted by Shauna Mazique on Jun 13th 2016
I am a chiropractor and have used a different massager for years. That massager was limited to vibration only and patients have stated they get a deeper massage and feel relief after using the PurWave massager on them.
Posted by Mark J. DeMalio, DC www.drdemalio.com on May 31st 2016
Being a Chiropractor for over 23 years and having and using many other devices in the office, this machine delivers the punch & power needed for my patients at home, long battery life & no cord with great attachments. Many conditions can be treated with a little guidance on myofascial pain patterns, points and trigger areas to help patients avoid long term use of meds, injections and possibility of surgery if avoidable. Thumbs up for PADO.
Back to Top